| |
| MD001沙伯基础PMMA |
| 发布时间：2021-8-16 10:07:30 浏览次数：168 |
|
沙伯基础PMMA 总代理
有机玻璃PMMA/沙伯基础(原GE)/20HR高抗冲 汽车照明 硬包装 原料
PMMA 台湾奇美 CM-203
PMMA 台湾奇美 CM-205
PMMA 台湾奇美 CM-207
PMMA 台湾奇美 CM-211
PMMA 美国阿科玛 DR-101
PMMA 法国阿科玛 BS100
PMMA 法国阿科玛 DR101
PMMA 法国阿科玛 DR-66080
PMMA 法国阿科玛 HFI-10
PMMA 法国阿科玛 HFI-15
PMMA 法国阿科玛 HFI-7
PMMA 法国阿科玛 HT121
PMMA 法国阿科玛 MI7-101
PMMA 法国阿科玛 SG-7
PMMA 法国阿科玛 V 825-HID
PMMA 法国阿科玛 V020
PMMA 法国阿科玛 V040
PMMA 法国阿科玛 V045
PMMA 法国阿科玛 V150
PMMA 法国阿科玛 V825-100
PMMA 法国阿科玛 V825T-101
PMMA 法国阿科玛 V920-100
PMMA 法国阿科玛 VM-100
PMMA 法国阿科玛 VS-100
PMMA 日本住友化学 F15
PMMA 日本住友化学 G5065(粉）
PMMA 日本住友化学 G5097 (粉）
PMMA 日本住友化学 G5098 (粉）
PMMA 日本住友化学 HF25
PMMA 日本住友化学 HT013E
PMMA 日本住友化学 HT03Y
PMMA 日本住友化学 HT082S
PMMA 日本住友化学 HT084S
PMMA 日本住友化学 HT09X
PMMA 日本住友化学 HT25X
PMMA 日本住友化学 HT50Z
PMMA 日本住友化学 HT54X
PMMA 日本住友化学 HT55Z
PMMA 日本住友化学 LG
PMMA 日本住友化学 LG X
PMMA 日本住友化学 LG2
PMMA 日本住友化学 LG35
名称 |
牌号 |
性能 |
应用 |
PA12 |
E40-S3 |
PA12热塑性弹性体，邵氏D硬度40 |
运动鞋底，防滑底面，运动眼镜，护目眼镜 |
PA12 |
E47-S3 |
PA12热塑性弹性体，邵氏D硬度47 |
运动鞋底，防滑底面，运动眼镜，护目眼镜 |
PA12 |
E55-S3 |
PA12热塑性弹性体，邵氏D硬度55 |
运动鞋底，防滑底面，运动眼镜，护目眼镜 |
PA12 |
E58-S4 |
PA12热塑性弹性体，邵氏D硬度58 |
运动鞋底，防滑底面，运动眼镜，护目眼镜 |
PA12 |
L1723 |
低粘度PA12，热稳定性 |
电缆材料，紧固元件 |
PA12 |
L1940 |
中粘度PA12，热稳定性 |
光纤软管等 |
PA12 |
L2121 |
高粘度PA12，热稳定性 |
燃油，真空离合器线束，钢电缆护套 |
PA12 |
L1833 |
中粘度，23%玻纤增强 |
燃油管路快速接头 |
PA12 |
L1930 |
中粘度，30%玻纤增强 |
齿轮，滑动轴承，泵体配件 |
PA12 |
L-R3-MHI |
抗静电，体积电阻率为104ohms·cm |
电动风扇叶，电话及无线通讯线路等 |
PA12 |
L-R4-MHI |
抗静电，体积电阻率为105ohms·cm |
电动风扇叶，电话及无线通讯线路等 |
PA12 |
L-R7-MHI |
抗静电，体积电阻率为107ohms·cm |
电动风扇叶，电话及无线通讯线路等 |
PA12 |
L-R9-MHI |
抗静电，体积电阻率为109ohms·cm |
电动风扇叶，电话及无线通讯线路等 |
型号名称 |
说明 |
Apec® 1603 |
MVR (330°C/2.16kg) 25 cm³/10 min; high viscosity; UV stabilized; softening temperature (VST/B 120)=159 °C |
|
Apec® 1695 |
MVR (330°C/2.16kg) 45 cm³/10 min; easy release; softening temperature (VST/B 120)=158 °C; Covers for brake lights and indicator lights; Headlamp reflectors/bezels |
|
Apec® 1697 |
MVR (330°C/2.16kg) 45 cm³/10 min; low viscosity; easy release; UV stabilized; 'softening temperature (VST/B 120)=157°C |
|
Apec® 1703 |
MVR (330°C/2.16kg) 17 cm³/10 min; UV stabilized; 'softening temperature (VST/B 120)=171 °C; Covers for brake lights and indicator lights; Covers for domestic / industrial lamps; car interior light covers; Headlamp lenses |
|
Apec® 1745 |
MVR (330°C/2.16kg) 17 cm³/10 min; easy release; suitable for superheated steam sterilisation up to 143 °C as well as for pharmaceutical applications according to United States Pharmacopeia (USP) XXII Class VI; softening temperature (VST/B 120)=170 °C; Films for medical packaging; Contact lens holders; Medical vessels; Safety valve for respiration aids; Syringe tops |
|
Apec® 1795 |
MVR (330°C/2.16kg) 30 cm³/10 min; easy release; low viscosity; 'softening temperature (VST/B 120)=173°C; Covers for brake lights and indicator lights; Headlamp reflectors/bezels |
|
Apec® 1797 |
MVR (330°C/2.16kg) 30 cm³/10 min; low viscosity; easy release; UV stabilized; 'softening temperature (VST/B 120)=172 °C |
|
Apec® 1803 |
MVR (330°C/2.16kg) 10 cm³/10 min; high viscosity; UV stabilized; 'softening temperature (VST/B 120)=184 °C; Covers for brake lights and indicator lights; car interior light covers; Domestic lamp covers; Headlamp lenses; Covers for ships' lights; Connector pieces for halogen systems |
|
Apec® 1895 |
MVR (330°C/2.16kg) 18 cm³/10 min; easy release; 'softening temperature (VST/B 120)=183°C; Covers for brake lights and indicator lights; Recessed light fixtures/reflectors; Raised brake lights; Headlamp reflectors/bezels |
|
Apec® 1897 |
MVR (330°C/2.16kg) 18 cm³/10 min; easy release; UV stabilized; 'softening temperature (VST/B 120)=182°C; Lamp covers; Headlamp lenses |
|
Apec® 2095 |
MVR (330°C/2.16kg) 8 cm³/10 min; high viscosity; easy release; 'softening temperature (VST/B 120)=203 °C; Covers for brake lights and indicator lights; Recessed light fixtures/reflectors; Blade-type fuses; Headlamp reflectors/bezels |
|
Apec® 2097 |
MVR (330°C/2.16kg) 8 cm³/10 min; high viscosity; easy release; UV stabilized; 'softening temperature (VST/B 120)=202 °C; Lamp covers; Headlamp lenses |
|
Apec® DP1-9354 |
MVR (330°C/2.16kg) 12 cm³/10 min; flame retardant; high viscosity; only opaque colors available; V-0/1.5mm (UL 94); V-0/3.0mm (UL 94); 5VA/3.0mm (UL 94); 'softening temperature (VST/B 120)=185 °C |
|
Apec® FR1892 |
MVR (330°C/2.16kg) 18 cm³/10 min; easy release; 'softening temperature (VST/B 120)=183°C |
Makrolon® 1095 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 15 % glass fiber reinforced; UL 94V-0/3.0 mm; high viscosity; easy release; housings for power tools |
Makrolon® 1248 |
MVR (300 °C/1.2 kg) 7.0 cm³/10 min; food contact quality; medium viscosity; impact modified |
Makrolon® 1248 MAS068 |
MVR (300 °C/1.2 kg) 7.0 cm³/10 min; food contact quality; medium viscosity; impact modified |
Makrolon® 1260 |
MVR (300 °C/1.2 kg) 34 cm³/10 min; impact modified; low viscosity; easy release |
Makrolon® 1804 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; high viscosity; UV stabilized; optimized for low plate-out; solid sheet |
Makrolon® 1837 |
MVR (300 °C/1.2 kg) 11 cm³/10 min; impact modified; medium viscosity; easy release |
Makrolon® 1837 MAS081 |
MVR (300 °C/1.2 kg) 8.0 cm³/10 min; impact modified; medium viscosity; easy release |
Makrolon® 1881 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; impact modified; improved ultrasonic weldability; low viscosity; UV stabilized; easy release |
Makrolon® 1899 |
MVR (300 °C/1.2 kg) 16 cm³/10 min; special flame retardent system; UL 94V-0/0.75 mm; impact modified; medium viscosity; easy release; vicat softening temperature 50 N; 50 °C/h = 110 °C; battery housing |
Makrolon® 1952 |
MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/2.3 mm; medium viscosity; UV stabilized; easy release; LCD notebook cover |
Makrolon® 1954 |
MVR (300 °C/1.2 kg) 18 cm³/10 min; low viscosity; UV stabilized; improved friction characteristics; housings- and operating parts; sliding elements |
Makrolon® 2205 |
MVR (300 °C/1.2 kg) 34 cm³/10 min; general purpose; low viscosity; easy release |
Makrolon® 2207 |
MVR (300 °C/1.2 kg) 35 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release |
Makrolon® 2256 |
MVR (300 °C/1.2 kg) 34 cm³/10 min; food contact quality; low viscosity; easy release |
Makrolon® 2258 |
MVR (300 °C/1.2 kg) 34 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; easy release |
Makrolon® 2405 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; easy release |
Makrolon® 2405 MAS048 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; easy release |
Makrolon® 2405 MAS056 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; improved impact strength; low viscosity; easy release |
Makrolon® 2405 MAS057 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; improved impact strength; low viscosity; easy release |
Makrolon® 2407 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release |
Makrolon® 2407 MAS056 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; improved impact strength; low viscosity; UV stabilized; easy release |
Makrolon® 2407 MAS070 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release |
Makrolon® 2407 MAS145 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; general purpose; low viscosity; UV stabilized; easy release |
Makrolon® 2408 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; low viscosity |
Makrolon® 2456 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; food contact quality; low viscosity; easy release |
Makrolon® 2458 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; easy release |
Makrolon® 2467 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; low viscosity; UV stabilized; easy release |
Makrolon® 2556 |
MFR 15 g/10 min; food contact quality; medium viscosity; easy release |
Makrolon® 2558 |
MVR (300 °C/1.2 kg) 14 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; easy release |
Makrolon® 2605 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; general purpose; medium viscosity; easy release |
Makrolon® 2607 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; general purpose; medium viscosity; UV stabilized; easy release |
Makrolon® 2608 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity |
Makrolon® 2652 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; food contact quality; medium viscosity; easy release; complies with the BfR (formerly BgVV)- recommendations IX, XI and XLII abbr. the EN 71 part 3; toys |
Makrolon® 2656 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; food contact quality; medium viscosity; easy release |
Makrolon® 2658 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; easy release |
Makrolon® 2665 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; chlorine- and bromine-free flame retardancy; UL 94V-2/1.5 mm and 3.0 mm; medium viscosity; easy release |
Makrolon® 2665 MAS071 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; medium viscosity; easy release |
Makrolon® 2667 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; medium viscosity; UV stabilized; easy release |
Makrolon® 2805 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; easy release |
Makrolon® 2805 MAS145 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; easy release |
Makrolon® 2805 MAS152 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; easy release |
Makrolon® 2807 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; UV stabilized; easy release |
Makrolon® 2807 MAS167 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; UV stabilized; easy release |
Makrolon® 2856 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; food contact quality; medium viscosity; easy release |
Makrolon® 2858 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; easy release |
Makrolon® 2865 |
MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; medium viscosity; easy release |
Makrolon® 3105 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; general purpose; high viscosity; easy release |
Makrolon® 3106 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; food contact quality; high viscosity |
Makrolon® 3107 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; general purpose; high viscosity; UV stabilized; easy release |
Makrolon® 3107 MAS167 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; general purpose; high viscosity; UV stabilized; easy release |
Makrolon® 3108 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity |
Makrolon® 3152 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; food contact quality; high viscosity; easy release; complies with the BfR (formerly BgVV)- recommendations IX, XI and XLII abbr. the EN 71 part 3; toys |
Makrolon® 3156 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; food contact quality; high viscosity; easy release |
Makrolon® 3158 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity; easy release |
Makrolon® 3206 |
MVR (300 °C/1.2 kg) 5.0 cm³/10 min; food contact quality; high viscosity |
Makrolon® 3208 |
MVR (300 °C/1.2 kg) 5.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity |
Makrolon® 3258 |
MVR (300 °C/1.2 kg) 5.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity; easy release |
Makrolon® 6165 X |
MVR (300 °C/1.2 kg) 28 cm³/10 min; flame retardant; UL 94V-0/1.2 mm; low viscosity; easy release; LCD tv frame |
Makrolon® 6265 X |
MVR (300 °C/1.2 kg) 19 cm³/10 min; flame retardant; UL 94V-0/1.5 mm; low viscosity; easy release |
Makrolon® 6267 X |
MVR (300 °C/1.2 kg) 19 cm³/10 min; flame retardant; UL 94V-0/1.5 mm; low viscosity; UV stabilized; easy release |
Makrolon® 6455 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; easy release |
Makrolon® 6457 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; UV stabilized; easy release |
Makrolon® 6485 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; easy release |
Makrolon® 6487 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release |
Makrolon® 6555 |
MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; easy release |
Makrolon® 6557 |
MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; UV stabilized; easy release |
Makrolon® 6717 |
MVR (300 °C/1.2 kg) 3.0 cm³/10 min; flame retardant; UL 94V-0/2.0 mm; high viscosity; branched; UV stabilized; easy release |
Makrolon® 8025 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 20 % glass fiber reinforced; milled fiber; high viscosity; easy release; precision parts |
Makrolon® 8035 |
MVR (300 °C/1.2 kg) 4.0 cm³/10 min; 30 % glass fiber reinforced; milled fiber; high viscosity; easy release; precision parts |
Makrolon® 8325 |
MVR (300 °C/1.2 kg) 4.0 cm³/10 min; 20 % glass fiber reinforced; high viscosity; easy release |
Makrolon® 8345 |
MVR (300 °C/1.2 kg) 3.0 cm³/10 min; 35 % glass fiber reinforced; high viscosity; easy release |
Makrolon® 9125 |
MVR (300 °C/1.2 kg) 8.0 cm³/10 min; 20 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm; medium viscosity; easy release |
Makrolon® 9415 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 10 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; high viscosity; easy release |
Makrolon® 9417 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 10 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; high viscosity; UV stabilized; easy release |
Makrolon® 9425 |
MVR (300 °C/1.2 kg) 5.0 cm³/10 min; 20 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; high viscosity; easy release |
Makrolon® AG2677 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; medium viscosity; UV stabilized; easy release; automotive glazing; roof modules |
Makrolon® AL2447 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; Automotive lighting; low viscosity; UV stabilized; easy release; headlamp lenses for automotive forward lighting |
Makrolon® AL2647 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; Automotive lighting; medium viscosity; UV stabilized; easy release; headlamp lenses for automotive forward lighting |
Makrolon® DP1-1821 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; lenses, optical; high viscosity; UV stabilized; easy release; high purity |
Makrolon® EM9417 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 10 % glass fiber reinforced; flame retardant; high viscosity; UV stabilized; easy release |
Makrolon® ET IR320 |
PC/IR absorber concentrate; Extrusion; high viscosity; special grade for heat absorbing ; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV110 |
PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV112 |
MVR (300 °C/1.2 kg) 13 cm³/10 min; high viscosity; Corrugated Sheets; special grade for the coextrusion of Makrolon ET base resins; with anti stick properties for finished sheets |
Makrolon® ET UV120 |
PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV130 |
PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV510 |
PC/UV absorber concentrate; high viscosity; easy release; very low plate-out; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV530 |
PC/UV absorber concentrate; high viscosity; easy release; very low plate-out; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV540 |
PC/UV absorber concentrate; high viscosity; easy release; very low plate-out; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET2613 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; Extrusion; medium viscosity; UV stabilized; solid sheet |
Makrolon® ET3113 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; high viscosity; UV stabilized; solid sheet; corrugated sheet |
Makrolon® ET3117 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; high viscosity; UV stabilized; easy release; multi wall sheets / profiles; corrugated sheet |
Makrolon® ET3127 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; high viscosity; branched; UV stabilized; easy release; multi wall sheets / profiles |
Makrolon® ET3137 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; high viscosity; branched; UV stabilized; easy release; multi wall sheets / profiles; panels |
Makrolon® ET3227 |
MVR (300 °C/1.2 kg) 3.0 cm³/10 min; Extrusion; high viscosity; branched; UV stabilized; easy release; multi wall sheets / profiles |
Makrolon® FR7067 |
MVR (300 °C/1.2 kg) 20 cm³/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release; electrical/electronic |
Makrolon® FR7087 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-0/2.2 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release; electrical/electronic |
Makrolon® FU1007 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; special grade for furniture applications with demands regarding fire standards UNI 8456, 8457, 9174 and 9175; medium viscosity; UV stabilized; easy release |
Makrolon® GF8001 |
MVR (300 °C/1.2 kg) 16 cm³/10 min; 20 % glass fiber reinforced; low viscosity; easy release; housing parts |
Makrolon® GF8002 |
MVR (300 °C/1.2 kg) 10 cm³/10 min; 15 % glass fiber reinforced; medium viscosity; easy release |
Makrolon® GF9002 |
MVR (300 °C/1.2 kg) 15 cm³/10 min; 10 % glass fiber reinforced; flame retardant; UL 94V-0/1.2 mm; low viscosity; easy release; electrical/electronic; housing parts with low wall thickness |
Makrolon® 3108 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity |
Makrolon® 3152 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; food contact quality; high viscosity; easy release; complies with the BfR (formerly BgVV)- recommendations IX, XI and XLII abbr. the EN 71 part 3; toys |
Makrolon® 3156 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; food contact quality; high viscosity; easy release |
Makrolon® 3158 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity; easy release |
Makrolon® 3206 |
MVR (300 °C/1.2 kg) 5.0 cm³/10 min; food contact quality; high viscosity |
Makrolon® 3208 |
MVR (300 °C/1.2 kg) 5.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity |
Makrolon® 3258 |
MVR (300 °C/1.2 kg) 5.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity; easy release |
Makrolon® 6165 X |
MVR (300 °C/1.2 kg) 28 cm³/10 min; flame retardant; UL 94V-0/1.2 mm; low viscosity; easy release; LCD tv frame |
Makrolon® 6265 X |
MVR (300 °C/1.2 kg) 19 cm³/10 min; flame retardant; UL 94V-0/1.5 mm; low viscosity; easy release |
Makrolon® 6267 X |
MVR (300 °C/1.2 kg) 19 cm³/10 min; flame retardant; UL 94V-0/1.5 mm; low viscosity; UV stabilized; easy release |
Makrolon® 6455 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; easy release |
Makrolon® 6457 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; UV stabilized; easy release |
Makrolon® 6485 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; easy release |
Makrolon® 6487 |
MVR (300 °C/1.2 kg) 9.0 cm³/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release |
Makrolon® 6555 |
MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; easy release |
Makrolon® 6557 |
MVR (300 °C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; UV stabilized; easy release |
Makrolon® 6717 |
MVR (300 °C/1.2 kg) 3.0 cm³/10 min; flame retardant; UL 94V-0/2.0 mm; high viscosity; branched; UV stabilized; easy release |
Makrolon® 8025 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 20 % glass fiber reinforced; milled fiber; high viscosity; easy release; precision parts |
Makrolon® 8035 |
MVR (300 °C/1.2 kg) 4.0 cm³/10 min; 30 % glass fiber reinforced; milled fiber; high viscosity; easy release; precision parts |
Makrolon® 8325 |
MVR (300 °C/1.2 kg) 4.0 cm³/10 min; 20 % glass fiber reinforced; high viscosity; easy release |
Makrolon® 8345 |
MVR (300 °C/1.2 kg) 3.0 cm³/10 min; 35 % glass fiber reinforced; high viscosity; easy release |
Makrolon® 9125 |
MVR (300 °C/1.2 kg) 8.0 cm³/10 min; 20 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm; medium viscosity; easy release |
Makrolon® 9415 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 10 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; high viscosity; easy release |
Makrolon® 9417 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 10 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; high viscosity; UV stabilized; easy release |
Makrolon® 9425 |
MVR (300 °C/1.2 kg) 5.0 cm³/10 min; 20 % glass fiber reinforced; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; high viscosity; easy release |
Makrolon® AG2677 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; medium viscosity; UV stabilized; easy release; automotive glazing; roof modules |
Makrolon® AL2447 |
MVR (300 °C/1.2 kg) 19 cm³/10 min; Automotive lighting; low viscosity; UV stabilized; easy release; headlamp lenses for automotive forward lighting |
Makrolon® AL2647 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; Automotive lighting; medium viscosity; UV stabilized; easy release; headlamp lenses for automotive forward lighting |
Makrolon® DP1-1821 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; lenses, optical; high viscosity; UV stabilized; easy release; high purity |
Makrolon® EM9417 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; 10 % glass fiber reinforced; flame retardant; high viscosity; UV stabilized; easy release |
Makrolon® ET IR320 |
PC/IR absorber concentrate; Extrusion; high viscosity; special grade for heat absorbing ; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV110 |
PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV112 |
MVR (300 °C/1.2 kg) 13 cm³/10 min; high viscosity; Corrugated Sheets; special grade for the coextrusion of Makrolon ET base resins; with anti stick properties for finished sheets |
Makrolon® ET UV120 |
PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV130 |
PC/UV absorber concentrate; high viscosity; easy release; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV510 |
PC/UV absorber concentrate; high viscosity; easy release; very low plate-out; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV530 |
PC/UV absorber concentrate; high viscosity; easy release; very low plate-out; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET UV540 |
PC/UV absorber concentrate; high viscosity; easy release; very low plate-out; special grade for the coextrusion of Makrolon ET base resins; solid sheet; multi wall sheets / profiles |
Makrolon® ET2613 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; Extrusion; medium viscosity; UV stabilized; solid sheet |
Makrolon® ET3113 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; high viscosity; UV stabilized; solid sheet; corrugated sheet |
Makrolon® ET3117 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; high viscosity; UV stabilized; easy release; multi wall sheets / profiles; corrugated sheet |
Makrolon® ET3127 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; high viscosity; branched; UV stabilized; easy release; multi wall sheets / profiles |
Makrolon® ET3137 |
MVR (300 °C/1.2 kg) 6.0 cm³/10 min; Extrusion; high viscosity; branched; UV stabilized; easy release; multi wall sheets / profiles; panels |
Makrolon® ET3227 |
MVR (300 °C/1.2 kg) 3.0 cm³/10 min; Extrusion; high viscosity; branched; UV stabilized; easy release; multi wall sheets / profiles |
Makrolon® FR7067 |
MVR (300 °C/1.2 kg) 20 cm³/10 min; flame retardant; UL 94V-0/1.5 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release; electrical/electronic |
Makrolon® FR7087 |
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-0/2.2 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release; electrical/electronic |
Bayblend® 2953 |
(PC+ABS) blend; Vicat/B 120 temperature = 113°C; for electroplating applications. |
Bayblend® CG100 |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 130 °C; excellent flow. |
Bayblend® ET3032 FR |
Rubber modified PC blend; 10 % mineral filled; flame-retardant; extrusion grade; Vicat/B 120 temperature = 108 °C; good extrusion and vacuum-forming behaviour; UL 94 V-0 (0.75 mm) (internal test); glow wire temperature (GWFI): 960 °C at 2.0 mm. |
Bayblend® ET3036 FR |
(PC+ABS) blend; flame-retardant; extrusion grade; Vicat/B120 = 122 °C; UL 94 V-0 (1.5 mm) and V-1 (0.75 mm) (internal test); for pipe- and corrugated pipe extrusion. |
Bayblend® FR1514 |
(PC+ABS) blend; flame retardant; high heat resistance; Vicat/B 120 = 136 °C; ball indentation temperature >= 125 °C; UL recognition 94 V-0 at 1.5 mm; suitable as supporting material for energized parts. |
Bayblend® FR1514 BBS073 |
(PC+ABS) blend; flame retardant; high heat resistance; Vicat/B 120 = 136 °C; ball indentation temperature >= 125 °C; improved chemical resistance and stress cracking behavior compared to FR1514; UL recognition 94 V-0 at 1.5 mm; suitable as supporting material for energized parts. |
Bayblend® FR3000 |
(PC+ABS) blend; flame-retardant; easy-flow grade; Vicat/B 120 temperature = 97 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm); no juicing; good light stability. |
Bayblend® FR3000 BBS081 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; improved chemical resistance; Vicat/B 120 temperature = 97 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm); good light stability. |
Bayblend® FR3000 BBS306 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; Vicat/B120 = 97 °C; UL recognition 94 V-1 (2.0 mm). |
Bayblend® FR3000 HI |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; compared to FR3000 improved chemical resistance and stress cracking behavior; Vicat/B 120 temperature = 97 °C; UL recognition 94 V-0 at 1.5 mm. |
Bayblend® FR3001 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; Vicat/B 120 temperature = 103 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm). |
Bayblend® FR3002 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; Vicat/B 120 temperature = 99 °C; UL recognition 94 V-0 (1.0 mm); glow wire test (GWFI): 960 °C (2.0 mm); for notebooks and thinwall applications. |
Bayblend® FR3005 BBS310 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; Vicat/B 120 temperature = 89 °C; UL recognition 94 V-0 (1.5 mm); improved chemical resistance. |
Bayblend® FR3005 HF |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; very easy-flow grade; Vicat/B 120 temperature = 96 °C; UL recognition 94 V-0 (1.5 mm). |
Bayblend® FR3006 HF |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; increased heat resistance; Vicat/B 120 = 108 °C; easy flow version of FR3006; UL recognition 94 V-1 at 1.5 mm, V-0 at 1.8 mm and 5VB at 1.8 mm. |
Bayblend® FR3008 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; improved chemical and hydrolysis resistance; HDT/A >= 85 °C; Vicat/B 120 temperature = 103 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm); good light stability. |
Bayblend® FR3008 HR |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; improved chemical and very good hydrolysis resistance; HDT/A >= 85 °C; Vicat/B 120 temperature = 103 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm); good light stability. |
Bayblend® FR3009 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; Vicat/B 120 = 103 °C; UL recognition 94 5VB at 1.8 mm; good hydrolysis resistance; successor to FR3000 BBS066. |
Bayblend® FR3010 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; increased heat resistance; Vicat/B 120 temperature = 110 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm); improved chemical resistance and stress cracking behavior; successor to FR2010. |
Bayblend® FR3010 HF |
Previous name Bayblend FR2010; (PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; easy-flow grade; Vicat/B 120 temperature = 108 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm); optimized processability; good light stability. |
Bayblend® FR3010 IF |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; increased heat resistance; Vicat/B 120 temperature = 108 °C; improved flammability; UL recognition 94 5VB (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm); improved flow compared to FR3010. |
Bayblend® FR3011 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; good flow; high heat resistance; Vicat/B 120 temperature = 118 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm); good light stability. |
Bayblend® FR3012 |
(PC+ABS) blend; unreinforced; flame retardant; injection molding grade; Vicat/B120 = 102 °C; UL recognition 94 V-1 (1.5 mm); good light stability. |
Bayblend® FR3015 |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; Vicat/B 120 = 118 °C; UL 94 V-0 (1.5 mm). |
Bayblend® FR3020 |
(PC+ABS) blend; 5 % mineral filled; flame retardant; for thin-wall applications; injection molding; Vicat/B 120 = 103 °C; HDT/A >= 85 °C; very good UL recognition in small wall thicknesses (UL 94 V-0 at 0.75 mm). |
Bayblend® FR3020 W |
Rubber modified PC blend; 5% mineral filled; flame-retardant; Vicat/B 120 temperature = 102°C; UL 94 V-0 (0.6mm); low smoke density |
Bayblend® FR3021 |
(PC+ABS) blend; 15 % mineral filled; flame retardant; injection molding grade; increased stiffness; tensile modulus = 4800 MPa; Vicat/B 120 temperature = 98 °C; UL recognition 94 V-0 (1.5 mm); glow wire test (GWFI): 960 °C (2.0 mm). |
Bayblend® FR3021 GR |
(PC+ABS) blend; 15 % mineral filled; with 30 % post consumer recyclate - water bottle content; flame retardant; injection molding grade; increased stiffness; tensile modulus = 4600 MPa; Vicat/B 120 temperature = 97 °C; UL recognition 94 V-0 (1.5 mm). |
Bayblend® FR3030 |
(PC+ABS) blend; unreinforced; flame-retardant; extrusion grade; Vicat/B 120 temperature = 115 °C; good extrusion and vacuum-forming behaviour; UL recognition 94 V-0 (1.5 mm); halogen-free according to DIN VDE 0472,815; glow wire temperature (GWFI): 960 °C at 1.0 mm. |
Bayblend® FR3040 |
(PC+ABS) blend; unreinforced; flame-retardant; for thin-wall applications; injection molding grade; Vicat/B 120 = 108 °C; HDT/A >= 85 °C; very good burning behavior in small wallthicknesses (UL recognition 94 V-0 at 0.75 mm and above and V-1 at 0.6 mm). |
Bayblend® FR3050 |
(PC+ABS) blend; unreinforced; flame-retardant; high heat resistant injection molding grade; improved chemical resistance and stress cracking behavior compared to FR1514; ball indentation temperature >= 125 °C; Vicat/B 120 temperature = 136 °C; UL recognition 94 V-1 at 1.0 mm; suitable as supporting material for energized parts. |
Bayblend® FR3100 TV |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; high heat resistance; Vicat/B 120 = 110 °C; improved impact strength and chemical resistance; UL recognition 94 V-1 at 1.5 mm and V-0 at 2.0 mm. |
Bayblend® FR3110 TV |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; high heat resistance; Vicat/B 120 = 110 °C; easy flow; UL recognition 94 V-0 at 1.5 mm. |
Bayblend® FR3200 TV |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; for high gloss applications, RHCM process etc.; Vicat/B 120 = 96 °C; easy flow; UL recognition 94 V-0 at 1.2 mm; formerly trial product Bayblend FR TP SH001. |
Bayblend® FR3210 TV |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; easy flow; improved surface quality; Vicat/B 120 = 93 °C; UL recognition 94 V-0 (1.2 mm). |
Bayblend® FR3305 TV |
(PC+ABS) blend; 10% glass fibre reinforced; flame-retardant; injection molding grade; Vicat/B 120 = 103 °C; UL recognition 94V-0 at 1.2 mm and V-1 at 1.0 mm. |
Bayblend® FR3310 TV |
(PC+ABS) blend; 15% glass fibre reinforced; flame-retardant; injection molding grade; Vicat/B 120 = 100 °C; UL recognition 94 V-1 at 1.2 mm and V-0 at 1.5 mm. |
Bayblend® FR3311 TV |
(PC+ABS) blend; 15% glass fibre reinforced; flame-retardant; easy flow; injection molding grade; Vicat/B 120 = 96 °C UL recognition 94V-1 at 1.2 mm and V- at 1.5 mm. |
Bayblend® FR410 MT |
Rubber modified PC blend; 10 % mineral filled; flame-retardant; Vicat/B 120 = 108 °C; very good UL recognition in small wallthickness (V-0 at 0.75 mm); for railway interiors. Due to the special formulation of this grade, the final parts may require coating. Please contact us directly regarding classifications according to the respective rail standards. |
Bayblend® FR421 MT |
Rubber modified, mineral filled PC blend; flame retardant; Vicat/B 120 = 134 °C; extrusion grade for aircraft interiors. Please contact us directly regarding classifications according to the respective aircraft standards. |
Bayblend® FR630 GR |
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; with 30 % post consumer recyclate; Vicat/B 120 temperature = 108 °C; UL recognition 94 V-0 (1.5 mm). |
Bayblend® M301 FR |
PC+ABS-FR(40); Vicat/B 120 = 105°C; suitable for use in electrical and electronic devices. Manufactured according to GMP, tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin only. Please contact us directly for questions regarding biocompatibility under plastics@covestro.com. |
Bayblend® M303 FR |
PC+ABS-FR(40); Vicat/B 120 = 115°C; suitable for use in electrical and electronic devices. Manufactured according to GMP, tested only according to ISO 10993-5 and ISO 10993-10 for contact with uncompromised skin only. Please contact us directly for questions regarding biocompatibility under plastics@covestro.com. |
Bayblend® M750 |
(PC+ABS) blend; Vicat/B 120 temperature = 126°C; meet certain requirements of ISO Standard 10993-1. For further information please contact us directly under plastics@covestro.com. |
Bayblend® M850 XF |
(PC+SAN-I) blend; Vicat/B 120 temperature = 131°C; easy flow; meet certain requirements of ISO Standard 10993-1. For further information please contact us directly under plastics@covestro.com. |
Bayblend® R-FR610 |
Flame retardant recyclate grade; Vicat/B 120 temperature > 100 °C; UL recognition 94 V-0 (1.5 mm); not all colors available. |
Bayblend® T45 PG |
(ABS+PC) blend; Vicat/B 120 temperature = 112 °C; for electroplating applications. |
Bayblend® T50 XF |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 = 115 °C; excellent flow; good low temperature impact strength. |
Bayblend® T65 AT |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 121 °C; improved antistatic behavior; good flow. |
Bayblend® T65 HG |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 120 °C; easy flowing; high gloss; brilliant colors. |
Bayblend® T65 HI |
(PC+ABS) blend; unreinforced; grade with improved low-temperature impact strength and chemical resistance for automotive parts; also suitable for extrusion/extrusion blow molding and electroplating applications; Vicat/B 120 temperature = 120 °C. |
Bayblend® T65 PG |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 120 °C; easy flow; high heat resistance; for electroplating applications. |
Bayblend® T65 XF |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 120 °C; improved flowability compared to T65. |
Bayblend® T80 XG |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 130 °C; excellent flow; optimized surface quality for metallization (steam treatment). |
Bayblend® T85 HG |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 130 °C; easy flowing; high gloss; brilliant colors. |
Bayblend® T85 SG |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 130 °C; high melt flow; suitable for DirectCoating / DirectSkinning. |
Bayblend® T85 XF |
(PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 temperature = 130 °C; better flow than T85. |
Bayblend® T88 GF-10 |
Rubber modified (PC+SAN) blend; 10 % glass fiber filled; injection molding grade; optimized heat ageing- and UV-stability; very good flow; tensile modulus = 4800 MPa; high heat resistance; Vicat/B 120 = 134 °C. |
Bayblend® T88 GF-20 |
Rubber modified (PC+SAN) blend; 20 % glass fiber filled; injection molding grade; optimized heat ageing- and UV-stability; very good flow; tensile modulus = 7200 MPa; high heat resistance; Vicat/B 120 = 130 °C. |
Bayblend® T88 GF-30 |
Rubber modified (PC+SAN) blend; 31 % glass fiber filled; injection molding grade; optimized heat ageing- and UV-stability; very good flow; tensile modulus = 10000 MPa; high heat resistance; Vicat/B 120 = 134 °C. |
Bayblend® T90 HT |
(PC+ABS) blend; unreinforced; injection molding grade; high heat resistance; Vicat/B 120 = 135 °C; ball indentation temperature >= 125 °C; easy flow; suitable as supporting material for energized parts. |
Bayblend® T90 MF-20 |
Rubber modified (PC+SAN) blend; 20 % mineral filled; injection molding grade; very good flow; reduced coefficient of thermal expansion; tensile modulus = 4900 MPa; high heat resistance; Vicat/B 120 = 130 °C. |
Bayblend® T90 XF |
(PC+ABS) blend; non-reinforced; injection molding; Vicat B120 = 132°C; good balance of melt flow, impact strength and stress cracking resistance. |
Bayblend® T90 XG |
(PC+ABS) blend, non-reinforced, injection molding grade, Vicat B120=135°C, easy flowing, optimized surface quality for metallization |
Bayblend® T95 MF |
(PC+ABS) blend; 9 % mineral filled; injection molding grade; very high heat resistance; Vicat/B 120 = 142 °C; reduced coefficient of thermal expansion; tensile modulus = 3350 MPa. |
Bayblend® W85 HI |
(PC+ASA) blend; improved weather resistance; optimized heat ageing stability; excellent low temperature ductility; high heat resistance; Vicat/B 120 = 134 °C. |
Bayblend® W85 XF |
(PC+ASA) blend; unreinforced; injection molding grade with improved weather resistance; optimized heat ageing stability; easy flow; high heat resistance; Vicat/B 120 = 132 °C |
分类 |
牌号 |
特长 |
UL94 |
缓燃,标准 |
PET B3015FA |
15%玻璃纤维增强,黑色 |
HB |
PET B3030FA |
30%玻璃纤维增强,黑色,高刚性 |
HB |
PET B3045FA |
45%玻璃纤维增强,黑色,高刚性 |
HB |
特殊 |
PET BLR6001MZ |
低翘曲性,黑色 |
HB |
阻燃,标准 |
PET BN3030SD |
30%玻璃纤维增强,黑色 |
V-0 |
缓燃,标准 |
PET C3015FA |
15%玻璃纤维增强 |
HB |
PET C3030FA |
30%玻璃纤维增强 |
HB |
阻燃,标准 |
PET CN3030SD |
30%玻璃纤维增强 |
分类 |
牌号 |
特长 |
颜色 |
UL94 |
滑动性 |
POM AW-01 |
特殊润滑剂,高性能高滑动性 |
CF2001/CD3501 |
HB |
低VOC |
POM AW-01LV |
滑动性 |
CF2001/CD3501 |
HB |
滑动性 |
POM AW-09 |
高性能高滑动性,特殊润滑剂,高粘度 |
CF2001 |
- |
导电性 |
POM CH-10 |
耐摩擦磨耗·加10%碳纤维增强 |
CD3501 |
HB |
POM CH-15 |
耐摩擦磨耗·加15%碳纤维增强 |
CD3501 |
- |
POM CH-20 |
耐摩擦磨耗·加20%碳纤维增强 |
CD3501 |
HB |
抗蠕变性 |
POM CP15X |
|
CF2001 |
HB |
导电性 |
POM EB-08 |
防静电·含10%碳粉 |
CD3501 |
- |
POM EB-10 |
防静电·含10%碳粉 |
CD3501 |
HB |
POM ES-5 |
防静电·含5.0%碳粉 |
CD3501 |
HB |
POM EW-02 |
防静电·含10%碳粉 |
CD3501 |
HB |
挤出成型 |
POM FP15X |
熔融挤出 |
CF2001 |
HB |
低翘曲 |
POM GB-25R |
低翘曲,加25%玻璃珠 |
CF3500/CD3501 |
HB |
玻璃纤维增强 |
POM GH-10 |
加10%玻璃纤维增强 |
CF3500 |
相当于HB |
POM GH-20 |
加20%玻璃纤维增强,高刚性 |
CF3500 |
HB |
POM GH-25 |
加25%玻璃纤维增强,高刚性 |
CF3500/CD3501 |
HB |
POM GH-25D |
加25%玻璃纤维增强,高流动,高刚性,高强度 |
CF3500/CD3501 |
HB |
POM GH-25LV |
加25%玻璃纤维增强,低VOC |
CF3500 |
HB |
POM GM-20 |
加20%玻璃纤维增强,低翘曲 |
CF3500 |
HB |
高刚性 |
POM HP25X |
高粘度 |
CF2001 |
HB |
POM HP270X |
高流动 |
CF2001 |
HB |
POM HP90X |
标准级 |
CF2001 |
HB |
滑动级 |
POM JW-03 |
特殊润滑剂,高性能高滑动,低流动 |
CF2001 |
HB |
矿物质增强型 |
POM KT-20 |
加20%无机物增强·高刚性·耐摩擦磨耗 |
CF2001 |
HB |
耐候级 |
POM LU-02 |
抗紫外线,低光泽(亚光) |
CF2001 |
HB |
POM LU-02LV |
抗紫外线,低光泽(亚光),低VOC |
CF2001 |
- |
标准级 |
POM M140-44 |
高流动 |
CF2001 |
HB |
POM M140S |
CF2001 |
HB |
挤出成型 |
POM M25-34 |
|
CF2001 |
HB |
标准级 |
POM M25-44 |
高粘度 |
CF2001/CD3068 |
HB |
耐候级 |
POM M25-45 |
高粘度 |
CF2001 |
HB |
低VOC |
POM M25LV |
|
CF2001 |
HB |
标准级 |
POM M25S |
高粘度 |
CF2001/CD3069 |
HB |
POM M270-44 |
高流动·短成型周期 |
CF2001/CD3068 |
HB |
耐候级 |
POM M270-45 |
高流动 |
CF2001 |
HB |
POM M270-45LV |
低VOC |
CF2001 |
HB |
低VOC |
POM M270LV |
|
CF2001/CD3069 |
HB |
标准级 |
POM M270S |
高流动·短成型周期 |
CF2001/CD3069 |
HB |
POM M450-44 |
超高流动·短成型周期 |
CF2001 |
HB |
POM M450S |
CF2001/CD3069 |
HB |
母粒 |
POM M90-07 |
黑色母料(For LV) |
K30682 |
HB |
标准级 |
POM M90-44 |
通用 |
CF2001/CD3068 |
HB |
POM M90-45 |
耐候性 |
CF2001/CD9100/CD9300 |
HB |
POM M90-45LV |
耐候性,低VOC |
CF2001/CD3068 |
HB |
其他 |
POM M90-71 |
耐热级 |
CF2001 |
HB |
标准 |
POM M90FC |
标准 |
CF2001 |
HB |
激光透过 |
POM M90LP |
|
PL-T7A735 |
- |
低VOC |
POM M90LV |
标准 |
CF2001/CD3069 |
HB |
标准 |
POM M90S |
标准 |
CF2001/CD3069 |
HB |
滑动级 |
POM MS-02 |
二硫化钼增强,耐摩擦磨耗 |
CD9000 |
HB |
POM NW-02 |
特殊润滑剂,高性能高滑动性 |
CF2001/CD3501 |
HB |
POM NW-02LV |
低VOC |
CF2001/CD3501 |
HB |
POM OL-10 |
含油,耐摩擦磨耗 |
CF2001 |
HB |
高耐冲击·柔韧性 |
POM SF-10 |
高耐冲击·柔韧性 |
CF2001 |
HB |
POM SF-15 |
CF2001 |
HB |
低VOC |
POM SF-15LV |
Tough |
CF2001 |
相当于HB |
高耐冲击·柔韧性 |
POM SF-20 |
高耐冲击·柔韧性 |
CF2001 |
HB |
滑动级 |
POM SW-01 |
特殊润滑剂,含10%碳酸钙填料 |
CF2001/CD3501 |
HB |
POM SW-01LV |
低VOC,含10%碳酸钙填料 |
CF2001 |
HB |
POM SW-22 |
高滑动性,高刚性,高流动,含10%矿物填料 |
CF2001 |
HB |
POM SW-41 |
高滑动性,高刚性,含20%矿物填料 |
CF2001 |
HB |
柔韧级 |
POM SX-35 |
质软·消音 |
CF2001 |
HB |
低VOC |
POM TF-10LV |
Tough |
CF2003/CF2004 |
- |
高耐冲击·柔韧性 |
POM TF-20 |
高耐冲击·柔韧性 |
CF2001/CF2002 |
- |
POM TF-30 |
CF2002/CF2003 |
- |
矿物质增强型 |
POM TR-10D |
加10%滑石填料·高刚性·低翘曲 |
CF2001/CD3501 |
HB |
POM TR-20 |
加15%滑石填料·高刚性·低翘曲 |
CF2001/CD3501 |
HB |
POM TR-20LV |
加15%滑石填料·高刚性·低翘曲·低VOC |
CF2001 |
HB |
POM TR-5 |
加5.0%滑石填料·高刚性·低翘曲 |
CF2001/CD3101 |
HB |
滑动级 |
POM TW-31 |
高滑动性,高刚性,低翘曲 |
CF2001 |
HB |
POM TW-51 |
CF2001 |
HB |
POM VW-09 |
|
CF2001 |
HB |
其他 |
POM WR-01 |
耐氯化水性 |
CF2001 |
- |
滑动级 |
POM YF-10 |
加10%PTFE润滑,耐摩擦磨耗 |
CF2001/CD3501 |
HB |
POM YF-20 |
加20%PTFE润滑,耐摩擦磨耗 |
CF2001 |
HB |
POM YF-5 |
加5.0%PTFE润滑,耐摩擦磨耗 |
CF2001 |
HB |
分类 |
牌号 |
特长 |
颜色 |
UL94 |
缓燃,标准 |
PBT 2000 |
非增强,高流动 |
EF2001/PLT9908 |
HB |
PBT 2002 |
非增强,高韧性 |
EF2001/ED3002 |
HB |
耐摩擦磨耗 |
PBT 2002K |
非增强,标准,含PTFE润滑剂 |
EF2001/ED3002 |
HB |
缓燃,标准 |
PBT 2002U |
非增强,耐候级 |
EF2001/ED3002 |
HB |
PBT 201AC |
非增强,标准 |
EF2001 |
相当于HB |
非卤素阻燃剂使用,高电弧性 |
PBT 201NF |
非增强,标准 |
EF2001/ED3002 |
V-0 |
耐摩擦磨耗 |
PBT 209AW |
非增强,标准 |
EF2001 |
V-0 |
改善多层成型树脂间的粘接性 |
PBT 303RA |
30%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
光盘驱动器和OA框架用 |
PBT 304SA |
15%玻璃纤维增强,低翘曲,SA系列,低比重,低磨耗型 |
ED3002/EF2001 |
HB |
缓燃,标准 |
PBT 3100H |
7.5%玻璃纤维增强,高韧性 |
EF2001/ED3002 |
HB |
PBT 3105 |
15%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
改善对环氧树脂的粘接性 |
PBT 3105A |
15%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
缓燃,标准 |
PBT 3105H |
15%玻璃纤维增强,高韧性 |
EF2001/ED3002 |
HB |
优质外观性,缓燃 |
PBT 3106 |
15%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
非卤素阻燃剂使用,高电弧性 |
PBT 310NF |
10%玻璃纤维增强,标准 |
EF2001/ED3002 |
V-0 |
改善多层成型树脂间的粘接性 |
PBT 313RA |
15%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
非卤素阻燃剂使用,高电弧性 |
PBT 315NF |
15%玻璃纤维增强,标准 |
EF2001/ED3002 |
V-0 |
PBT 315NFK |
15%玻璃纤维增强,CTI/PLC:0 |
EF2001/ED3002 |
V-0 |
缓燃,标准 |
PBT 3200 |
20%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
非卤素阻燃剂使用,高电弧性 |
PBT 320NF |
20%玻璃纤维增强,标准 |
EF2001/ED3002 |
V-0 |
缓燃,标准 |
PBT 3300 |
30%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
PBT 3300H |
30%玻璃纤维增强,高韧性 |
EF2001 |
相当于HB |
优质外观性,缓燃 |
PBT 3306 |
30%玻璃纤维增强,标准 |
EF2001/ED3002/ED3020 |
HB |
耐水解 |
PBT 330HR |
30%玻璃纤维增强 |
EF2001/ED3002 |
HB |
低聚物少容量,缓燃 |
PBT 330LC |
30%玻璃纤维增强,标准 |
EF2001 |
HB |
非卤素阻燃剂使用,高电弧性 |
PBT 330NF |
30%玻璃纤维增强,标准 |
EF2001/ED3002 |
V-0 |
缓燃,标准 |
PBT 3400 |
40%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
PBT 3405 |
45%玻璃纤维增强,标准 |
EF2001/ED3002 |
HB |
低聚物少容量,缓燃 |
PBT 340LC |
40%玻璃纤维增强,标准 |
EF2001 |
HB |
改善多层成型树脂间的粘接性 |
PBT 353RA |
30%玻璃纤维增强,耐水解 |
EF2001/ED3002 |
V-0 |
光盘驱动器和OA框架用 |
PBT 361SA |
15%玻璃纤维增强,低比重,低磨耗型,低翘曲,SA系列 |
ED3002 |
V-0 |
高耐冲击 |
PBT 457EV |
非增强?阻燃?高耐导电径迹 |
EF2001/ED3002 |
V-0(1.5mm) |
耐水解 |
PBT 522HR |
20%玻璃纤维增强,高电弧性 |
EF2001/ED3002 |
相当于HB |
耐水解,耐热冲击性 |
PBT 531HS |
30%玻璃纤维增强 |
EF2001/ED3002 |
HB |
光盘驱动器和OA框架用 |
PBT 601SA |
20%滑石填充,低比重,低磨耗型,低翘曲,SA系列 |
ED3002/EF2001 |
HB |
低翘曲,缓燃,一般 |
PBT 6300B |
30%玻璃珠填充,异向性改良型 |
EF2001/ED3002 |
HB |
耐摩擦磨耗性 |
PBT 6300T |
30%矿物填充,标准 |
EF2001/ED9050 |
HB |
PBT 6302T |
EF2001/ED9050 |
HB |
低翘曲,阻燃,一般 |
PBT 6370B |
30%玻璃珠填充,异向性改良型 |
EF2001/ED3002 |
V-0 |
光盘驱动器和OA框架用 |
PBT 652SA |
20%云母填充,低比重,低磨耗型,低翘曲,SA系列 |
ED3002/EF2001 |
V-1 |
PBT 701SA |
30%玻璃纤维增强,低比重,低磨耗型,低翘曲,SA系列 |
EF2001/ED3002 |
HB |
优质外观性,缓燃 |
PBT 702MS |
GF增强,高刚性,低翘曲,低凹陷 |
ED3002 |
HB |
光盘驱动器和OA框架用 |
PBT 711SA |
GF增强,低比重,低磨耗型,低翘曲,SA系列 |
EF2001/ED3002 |
HB |
低翘曲,阻燃,一般 |
PBT 7195W |
GF增强,超低翘曲 |
EF2001/ED3002 |
V-0 |
导电性 |
PBT 7300E |
含玻璃和炭粉填充,标准 |
ED3002 |
HB |
低翘曲,缓燃,一般 |
PBT 7307 |
30%玻璃纤维增强,超低翘曲 |
EF2001/ED3020 |
HB |
低翘曲,LD系列 |
PBT 733LD |
30%玻璃纤维增强,耐水解 |
ED3002/EF2001 |
HB |
低翘曲,阻燃,一般 |
PBT 7390W |
GF增强,超低翘曲 |
EF2001/ED3002 |
V-0 |
耐摩擦磨耗性 |
PBT 7400F |
30%玻璃纤维增强,PTFE润滑剂,标准 |
EF2001 |
HB |
低翘曲,缓燃,一般 |
PBT 7400W |
GF增强,超低翘曲 |
EF2001/ED3002 |
HB |
PBT 7407 |
EF2001/ED3002 |
HB |
低翘曲,LD系列 |
PBT 750LD |
GF30%增强,标准 |
ED3002/EF2001 |
V-0 |
光盘驱动器和OA框架用 |
PBT 751SA |
GF增强,低比重,低磨耗型,低翘曲,SA系列 |
EF2001/ED3002 |
V-0 |
优质外观性,阻燃 |
PBT 756HA |
低翘曲 |
EF2001/ED3002/Colored |
V-0 |
优质外观性,缓燃 |
PBT C5315N |
GF15%增强,标准 |
|
HB |
PBT C5330N |
GF30%增强,标准 |
|
HB |
优质外观性,阻燃 |
PBT CN5315N/B |
GF15%增强,标准 |
|
V-0 |
PBT CN5330N/B |
GF30%增强,标准 |
|
V-0 |
经UL认定可以使用50%回收料 |
PBT CN7000NN/BB |
非增强,标准 |
|
V-0 |
PBT CN7015NN/BB |
GF15%增强,阻燃,标准 |
|
V-0 |
PBT CN7030NN/BB |
GF30%增强,阻燃,标准 |
|
V-0 |
低翘曲,阻燃,一般 |
PBT CN7740XB |
GF增强,超低翘曲 |
|
V-0 |
阻燃,高电弧性 |
PBT CTN7133N/B |
GF增强,标准,CTI 0等级 |
|
V-0 |
|
PBT CTN7133 |
|
|
V-0 |
经UL认定可以使用50%回收料 |
PBT GFR330 |
GF30%增强,阻燃,新标准 |
EF2001/ED3002 |
V-0 |
高耐冲击 |
PBT H7500N |
非增强,标准 |
|
相当于HB |
低翘曲,阻燃,一般 |
PBT HN7315N/B |
GF15%增强,标准 |
|
V-0 |
PBT HN7330N/B |
GF30%增强,标准 |
|
V-0 |
低噪音,减振 |
PBT MH1304 T01 |
GF30%增强,缓燃 |
|
相当于HB |
PBT MH6304 T01 |
GF30%增强,阻燃 |
|
V-0 |
PBT RH1150 T01 |
GF15%增强,缓燃 |
|
HB |
超高流动性,徐燃 |
PBT SF3300 |
GF30%增强,标准 |
EF2001/ED3002 |
相当于HB |
PBT SF733LD |
GF30%增强,低翘曲 |
EF2001/ED3002 |
相当于HB |
PBT SF755 |
GF55%增强,高刚性,优质外观性 |
EF2001/ED3020 |
HB |
分类 |
牌号 |
特长 |
颜色 |
UL94 |
非增强 |
PPS 0220A9 |
高韧性 |
HD9100 |
V-0 |
特殊 |
PPS 0220U9 |
高耐冲击 |
HD9100 |
- |
玻璃纤维增强 |
PPS 1130A1 |
30%GF增强,高韧性 |
HF2000/HD9050 |
V-0 |
PPS 1130A64 |
30%GF增强,标准,低溢料 |
HD9100 |
V-0 |
特殊 |
PPS 1130T6 |
30%GF增强,高耐冲击 |
HD9050 |
V-0(1.6mm) |
玻璃纤维增强 |
PPS 1140A1 |
40%GF增强,高韧性 |
HF2000/HD9050 |
V-0 |
PPS 1140A6 |
40%GF增强,高强度 |
HF2000/HD9100 |
V-0 |
PPS 1140A64 |
40%GF增强,标准,低溢料 |
HF2000/HD9100 |
V-0 |
PPS 1140A66 |
40%GF增强,低氯 |
HD9100,HD9001 |
V-0 |
PPS 1140A7 |
40%GF增强,超高流动性·低溢料 |
HF2000/HD9050 |
V-0 |
特殊 |
PPS 2130A1 |
30%碳纤维增强,导电性·滑动性 |
HD9000 |
V-0 |
PPS 3130A1 |
30%矿物填充,滑动性 |
HF2000/HD9100 |
V-0 |
PPS 6150T6 |
玻璃和矿物填充,高耐冲击 |
HF2000/HD9100 |
- |
玻璃纤维增强/无机物增强 |
PPS 6165A4 |
GF+MD填充,尺寸精度优良·标准 |
HF2000/HD9050/HD9100 |
V-0 |
PPS 6165A6 |
HF2000/HD9100 |
V-0 |
PPS 6165A7 |
GF+MD填充,尺寸精度优良·低溢料 |
HF2000/HD9100 |
V-0 |
PPS 6165A7S |
GF+MD填充,耐油 |
HD9050 |
- |
特殊 |
PPS 6345A4 |
30%GF增强,PTFE润滑,滑动性 |
HF2000/HD9050 |
V-0 |
玻璃纤维增强/无机物增强 |
PPS 6465A6 |
GF+GB填充,低翘曲·外观良好 |
HD9050 |
V-0 |
PPS 6465A62 |
HF2000/HD9100 |
V-0 |
PPS 6565A6 |
GF+MD填充,低温模具·良好树脂间粘接性 |
HF2000/HD9050 |
V-0 |
PPS 6565A7 |
HD9050 |
V-0 |
特殊 |
PPS 7140A4 |
30%碳纤维增强,PTFE润滑,导电性·滑动性 |
HD9000 |
V-0 |
PPS 7340A4 |
GF+MD+CD填充,导电性 |
HD9000 |
V |
塑胶原料中国总代理，全国经销，质量保证，货源充足
免费送样 大量优惠 可订柜货,支持月结.原厂进口,
手机： 15807693310毛总
QQ： 1574559134
公司名称：东莞市大仁化工有限公司
公司电话：0769-83608876
公司地址1：东莞市樟木头塑胶城三期
详细地址:浙江省余姚市中国塑料城A区，
公司网站：htt://dongguandaren.sonhoo.com
|
 
上一篇：
临汾出售二手10吨40吨国标柴油罐，储水罐，甲醇罐市场
下一篇：
六脚钮子开关接线方式解析奥飞诺科技开关厂家
|
|
| |
联系我们 |
|
四川品牌网编辑部
客服QQ：840573529
业务咨询电话：010-52487360
QQ：593634808
投稿、投诉邮箱：lucky.27@126.com
|
|
